One Stop Water Treatment Equipment
Manufacturer in China
If you are looking for a professional water treatment equipment manufacturer in China, then NEWater can be your first choice. NEWater has been an expert water treatment equipment supplier in China since 2005, we can provide you turn key water treatment solutions. Just send us your detailed requirement and get our best solution now.
NEWater Water Treatment Equipment
The TDS level of brackish water is usually between 1,000 ppm and 10,000 ppm. The brackish water RO system is designed to obtain more energy through a large pressure pump.
Under certain pressure, the water is pushed through the membrane and filters under pressure to remove organics, ions, bacteria, pathogens, etc. in the water.
Nanofiltration is a membrane filtration process most commonly used to soften and disinfect water. Like RO membranes, nanofiltration membranes are also used in separation systems to complete filtration and purification by applying pressure.
The ultrafiltration system uses hollow membrane fibers to remove suspended solids, bacteria, viruses, and pathogens in the incoming water.
The water multimedia filter is used to reduce the SDI and TSS levels in the feed water. Suspended solids consist of small particles such as silt, clay, gravel, organic matter, algae, and other microorganisms.
Containerization is a multimodal cargo transportation system that uses multimodal containers. It is convenient and independent and is more conducive to installation and transportation.
Remove pollutants in wastewater and convert them into wastewater that can be returned to the water cycle, which greatly improves the utilization rate of water.
Designed specifically for scientists engaged in experimental work, the laboratory water purification system provides a wide range of pure water and ultra-pure water purification systems and services.
Why NEWater Can be Your Premier Water Treatment Equipment Manufacturer
During the last 15 years, NEWater has focused on providing turn-key water treatment solutions with our advanced equipment like reverse osmosis systems, brackish water RO systems, seawater systems, nanofiltration systems, ultrafiltration systems, EDI water systems, and more.
We have finished over 500 projects located in over 200 countries worldwide, you just need to send us requirements and get an instant quote within one working day.
Parts & Components
NEWater Provide Turn Key Solution for Most Industries
Custom the Right Solution for Your Factory
Expert Water Treatment Solution Based on Your Requirement
In creating a solution based on your URS, NEWater will help you
- Make 2D drawings and 3D files.
- Provide free consultation according to your detailed needs.
- Provide the best solution for your project.
One Year Warranty for All NEWater Equipment and Life Time Maintenance
You Will Get More than These:
- One-year warranty for all NEWaterwater treatment equipment.
- Best components such as filter elements, chemicals, valves, instruments, etc.
- One-stop service at NEWater.
- Meet all your customized water treatment needs.
Become an Expert When Importing Water Treatment Equipment from China
More Questions You May Have
NEWater’s treatment types of equipment are divided into a large system and a small system according to the water volume. The equipment is divided into portable water-making equipment, small modular equipment, skid-mounted equipment, and container-type equipment. According to different water volumes and customer requirements, we provide customized services.
Conventional small equipment takes 3-7 days, and large equipment takes 2-3 months. This is based on your requirements and water volume.
- As the voltage and frequency of different countries are different, we first need the local voltage and frequency of electricity.
- How many gallons the water requirement per hour is
- The water quality of the source water and what requirements need to be met
- If you need to provide on-site installation services
- Portable and small equipment — This is plug and play, it doesn’t need to be provided installation services. According to our instructions, you can install it by yourself.
- Small modular equipment, skid-mounted equipment, and container equipment-we will reserve the interface for docking. If there are installation workers, we will provide installation instructions and installation instructions. If necessary, we can also send someone to install it.
- How to provide installation instructions —— We have installation instructions and installation videos. If necessary, we can provide free remote software to help you with remote video installation instructions.
- We provide free installation instructions, with instruction manuals and installation videos
- Remote video installation guidance. If it is a large piece of equipment and the customer needs to install it by himself, then we will also provide free remote installation guidance service, but we need to plan a good time, within our working hours. Our working hours are from 9 o’clock to 18 o’clock Beijing time
- We send workers to install it. This needs to be based on the size of the project. If we have been designated to install it in the early stage, the installation service abroad will belong to our scope of work, and no additional charge is required.
- If we need to send someone to install it temporarily, we need to provide different charges according to different countries, installation technical requirements, and different types of technical work. Welcome to inquire.
There are several types of transportation, sea, air, and express
- If it is a small device and requires fast speed, we can provide door-to-door service by air and express, the normal transportation cycle is 5-10 days.
- If it is skid-mounted or container equipment, it is more appropriate to use the shipping method. The normal transportation cycle is 20-40 days.
Small equipment needs payment to delivery
For skid-mounted equipment and container equipment, 50% is prepaid, 30% is charged after video inspection, and 20% is charged before shipment.
Of course, we provide you with flexible ways of cooperation. Become our agents, and have more flexible support. Welcome to contact us.
Absolutely.
- NEWater provides free installation guidance and a one-year product warranty service. During the warranty service period, if there is an equipment problem, we provide free equipment repair or replacement services. If it is a manual operation, a fee will be charged. We can provide the required equipment replacement.
- We provide life-long after-sales service. NEWater has a full set of equipment and accessories, which can be replaced. Don’t worry about the failure of after-sales and maintenance.
- During the warranty period, NEWater provides all kinds of professional technical support, and if necessary. We also provide remote video guidance services.
- After the warranty period, NEWater also provides life-long after-sales maintenance, which requires a certain amount of manual service. There are also many matching accessories that can be replaced, so there is no need to worry about the later operation of the equipment.
Yes, we do.
For conventional small equipment, NEWater has standardized equipment. For large-scale skid-mounted and container equipment, we can design a process that meets the needs according to different water quality requirements.
At the same time, we carry out three-dimensional drawing designs according to different requirements and then communicate with customers to confirm.
After the design confirmation is completed, we then proceed to custom processing. So you don’t have to worry about our design and production capacity. We will provide you with the most professional technical support.
