Centrifugal Pump
- Measurement of electrical conductivity
- Clients in over 200 countries
- Accurate and precise measurements
- Water Treatment Applications
- Multiple uses of devices
Raw water: Wastewater, industrial, domestic water, etc.
Produced water: Industrial, domestic, powerplant, etc.
Temperature: up to 180 °C
Measuring range: 0.055 – 2000ms/cm
Power supply: AC 100-240V 50/60Hz, DC 24V
Material: PP or PFA
Applications: Oil & gas, food, and beverage, chemical industry, etc.
Support customization.
Your Trusted Conductivity Meter Manufacturer in China
With the increase in the development of both engineering and research the need for devices to provide standardized measurements has also increased. Among these devices are Conductivity Meters, which are used for the measurement of electrical conductivity. We manufacture and provide high-quality Conductivity Meters.
Our Conductivity Meters are able to measure the conductivity of water-based solutions and thus are also able to monitor the water, determining the content and concentration of contamination. These impurities may include salts, free radicals, and metal ions among other conductive materials.
- Product Parameters
- Product Details
- Process Introduction
- Applications
- Hot FAQ
There are a lot of different Commercial Water Filters made by NEWater. To help you figure out which one is right for you, look at the following things:
- Aquaculture
- Food and beverage
- Sewage detection
- Chemical Industry
- Metallic and mining
- Pharmaceutical Industry
Get Professional Water Deionizer System Solution
- Provide raw water quality data.
- Provide scenarios for the use of the Water Deionizer System.
- Provide the final water quality and quantity requirements to be achieved.
- Provide your local current and voltage.
NEWater Conductivity Meter Features
- Accurate measurements and responsive
- LCD display
- Automatic temperature indicator
- Easy to operate and handy
- Conductivity electrode with high accuracy
Choose the Right Type of Conductivity Meter
- Contacting-type conductivity meter
A contacting-type conductivity sensor is typically made up of two insulated electrodes. The electrodes, which are typically made of 316 stainless steel, titanium-palladium alloy, or graphite, are sized, and spaced to provide a known “cell constant.” A cell constant of 1.0 theoretically describes two electrodes, each one square centimeter in the area and one centimeter apart. - Electrodeless type conductivity meter
To determine conductivity, an electrodeless conductivity sensor induces an alternating current in a closed loop of solution and measures its magnitude. Torroid A, which induces an alternating current in the solution, is driven by the conductivity meter. Torroid B detects the magnitude of the induced current, which is proportional to the solution’s conductance.
NEWater Conductivity Meter Highlighted Advantages
- Stable and precise.
- It is simple to use, calibrate, and maintain.
- Sensor materials and combinations can easily be customized to meet the requirements of unique applications.
- Can be used at a variety of temperatures and pressures.
- Measures the concentration of any ionizable solute.
NEWater Can Promise You
- Source manufacturers.
- One-to-one guidance.
- The strict quality control process.
- One-year warranty.
- Lifetime maintenance.
High-quality Parts and Skid-mounted Equipment to Support the System
A Variety of Matching Processes are Available
Send Your Inquiry Now
NEWater Conductivity Meter
Our Conductivity Meters make accurate measurements of the conductivity of the solution, this, in turn, allows it to determine the level of impurities present in the water-based solution. This helps in maintaining concentrations and keeping the content of the water constant when used in industrial-based processes. Allowing you to meet stringent standards of water purity set internationally.
At an industrial level, our Conductivity Meters make use of the indicative method. This method makes use of two coupled coils. One acts as a driving coil, this coil is supplied with a known current of a known voltage, and produces a magnetic field. The other acts as a secondary coil. A current is induced, that is the output and is what allows for measurements to be made.
Our Conductivity meters can be customized to your application area. If not the inductive method, the four electrode version of our Conductivity meter may also be used. This device makes much more minute measurements and is very sensitive. This allows for a good post-water treatment or pre-production measure to ensure that the quality is up to par.
NEWater Conductivity Meters are made from corrosion-resistant material and are guaranteed to measure low conductivity as well, allowing for an accurate determination of the impurity content of the water that is under observation, whether it be for treatment purposes or product making purposes.
Our Conductivity Meter due to its superior quality and high tech design is used in a wide range of applications, around the world. These include, but are not limited to hydroponics, water treatment systems, freshwater systems, and aquaponics among others. They are easy to operate and program and along with all the above-mentioned advantages are also economical.