- Usually installed at the beginning of the water treatment system
- Protects the ultrafiltration membrane
- Prepares water for reverse osmosis process
- Sometimes also used at the end of water treatment systems
- Works by the mechanical filtration method
Raw water: Manufacturing plant, food & beverage, water softening, etc.
Produced water: Commercial, industrial, agricultural, manufacturing, etc.
Max. transmembrane pressure [kPa]: 0-50 °C 300
Operating pH Range: 1 – 13
Material: Stainless steel, polymers, glass
Applications: Water softening, metal recovery, reduce hardness in water purification, etc.
Most Preferred Security Filter Manufacturer in China
Some advanced water treatment systems consist of security filters at the start. Usually, this filter is placed before the pressure vessel for treating water turgidity above 1 degree. The security filter effectively meets the criteria of preparing water for the subsequent stages, such as reverse osmosis and ultrafiltration.
This filter removes small substances such as activated carbon and tiny quartz sand according to its filtration accuracy. The level of filtration can vary according to the type of material used.
At NEWater, we employ a diverse set of materials to design the security filter. These include nylon, PP Cotton, and melt blown, among other things. The material is set in a steel tube and works by the process of mechanical filtration. The passage of water through the narrow pipe inlet ensures adequate pressure for the security filter to serve its purpose.
- Product Parameters
- Product Details
- Process Introduction
- Hot FAQ
|Size||Dimension mm||Flow m3/hr||Inlet Outlet||Pressure|
NEWater Security Filter Details:
NEWater Security Filter Work Flow:
Operating Principle Diagram of Security Filter: Inlet > By-pass valve > Inlet valve > Outlet valve > Check valve
- Food & Beverage Industry
- Pharmaceutical Industry
- RO filtration for drinking water
- Electronics, microelectronics, semiconductor Industry
- Chemical Industry
- Electroplating liquid, Oil & gas Industry
Get Professional Security Filter Solution
- Provide raw water quality data.
- Provide scenarios for the use of the Security Filter.
- Provide the final water quality and quantity requirements to be achieved.
- Provide your local current and voltage.
NEWater Security Filter Key Features
- High precision for filtration of solid impurities, powder, and other impurities in the fluid.
- Good sealing performance.
- Easy assembling and disassembling.
- Big capacity and durable.
- Thermal and chemical stability.
NEWater Security Filter Highlighted Advantages
- Stainless steel structure reduces bacteria buildup
- Corrosion resistance and quick disassembly for easy cleaning.
- An easy-to-install feature.
- Requires little floor space.
- There are high pressure and high-temperature designs available.
NEWater Can Promise You
- Source manufacturers.
- One-to-one guidance.
- The strict quality control process.
- One-year warranty.
- Lifetime maintenance.
High-quality Parts and Skid-mounted Equipment to Support the System
Send Your Inquiry Now
NEWater Security Filter
A key role of the security filter is to improve the pretreatment operation effect. It also assists in the optimization of the dosage of flocculants and coagulant acids, thereby maintaining a reasonable operating state of the pretreatment equipment. Furthermore, it optimizes the dosage of coagulant acids and flocculants, ensuring the required quality of the effluent water.
A good security filter can significantly improve the longevity of reverse osmosis equipment. This is because these can effectively remove water dirt, such as fine sand particles. These particles can cause substantial damage to the reverse osmosis setup, and therefore should be removed beforehand.
The security filter is open to calibration depending on the type of material used. The selection of material is based on an initial assessment of source water quality. NEWater encourages interested parties to contact with a report on the source water quality so that we can suggest the best filtration system.
Let’s have a look at the other benefits of installing a security filter. It should be used if the water supply is at risk from dissolved rust from old pipes. It usually consists of a deep mesh structure to facilitate mechanical filtration. This structure enables the filter to have a higher slag load capacity. The structure also enables it to withstand higher filtration pressure. The pore size is generally less than 10 micrometers, but we can even design filters with pore sizes lower than 5 micrometers.
The setup typically consists of a stainless-steel housing to hold the mesh. The general practice is to use R304 grade stainless steel. However, if the requirements include acid and alkali resistance, R316 grade stainless steel can also be used. The housing can be either flange type or clamp type depending on the flow of water. Large filtration flows are more suitable for flange-type housing. If needed, an activated carbon filtration element can be used. Sometimes, a wire-wound element is also used. The number of filtration elements can also vary, from a singular one to a dozen or more, depending on your requirements.
Regular checking is necessary to ensure optimum performance from the filter. Security filters need replacement from time to time. Contact us if you need to replace your existing security filter or if you are looking for new equipment for your facility.