Your Smartest Choice for RO Well Water Filtration Systems

Well Water Filtration Systems from NEWater

Well water filtration is a versatile and requirement-specific process. We manufacture well water filtration systems that can effectively eliminate bacteria, chromium, mercury, nitrates, radon, VOC, or Volatile Organic Compounds, chemicals, and, other contaminants. We design our well water filtration equipment based on the types of contaminants to be dealt with.

To perform the desired purifications, our well water systems further come with activated carbon pre-treatment, cationic and ionic resins, reverse osmosis membranes, electronic deionizers, UV, UF, infrared, and other filters.

Some of our well water filtration equipment also has an in-built water softness system that can eliminate calcium, magnesium, and other mineral content. These systems are useful for increasing the shelf life of different household appliances.

So, if you need a well water filtration system, get in touch with NEWater for further inquiries.

Well Water Filtration Systems: The Ultimate FAQ Guide

Why does well water need to be filtered? Well water contains a variety of bacteria, ions, and viruses that are detrimental to human health. Every year, people get sick from contaminants in their drinking water. Using a well water filtration system allows for proper maintenance of the water, ensuring that it is safe to drink and use, while also protecting home fixtures from damage caused by contaminants such as iron. In this guide, you will learn everything about the well water filtration system.

➣What Is A Well Water Filtration System?

A well water filtration system is a filter system that protects you from contaminants found in well water by removing them.

Many households consume private drinking water wells water. Well water is free and in abundance.

However, well water can have volatile organic compounds, radon, mercury, chromium 6, arsenic, lead, or bacteria.

For this reason, it is critical to have a filtration system that will remove the contaminants.

➣How Do You Know Whether You Need A Well Water Filtration System?

You need to test your well water for contaminants. If there is apparent evidence for the existence of contaminants, then you will need a well water filtration system.

High levels or amounts of contaminants warrant filtration.

You can purchase a water testing kit online. It is your responsibility to test the well water because state regulators or the EPA don’t regulate private wells.

You carry out a comprehensive test for the following contaminants:

• Arsenic
• Volatile organic compounds
• Radon
• Nitrates
• Mercury
• Chromium 6
• Bacteria

If any of these contaminants are present, the water is impure, and a well water filtration system is required.

That is how you know whether you need a well water filtration system.

Test the well water annually and more frequently if:

• Appearance, odor, or taste changes.
• Elderly people or infants are living in the house.
• Residents experience gastrointestinal conditions that are recurrent.

If you do not wish to test the well water yourself for contaminants, there is a different option. You can have a sample sent to a qualified testing lab.

The lab will provide a comprehensive report on which contaminants are present in your well water.

➣Which Factors Should You Consider When Choosing  A Well Water Filtration System?

Before you choose a well water filtration system, you should evaluate a few factors.

These factors include filter type, flow rate, filter size, and contaminants you intend to filter out.

Filter Type

There is a wide range of filters used in a well water filtration system. Each is appropriate for filtering out specific contaminants. They include:

1. Infrared filters: These filters use heat and light to remove the contaminants. They are best for applications that involve hard water. They are most efficient in removing bacteria but not so much so for other contaminants.
2. UV filters are quite similar to infrared filters because they efficiently remove bacteria but not other contaminants. They do this using ultraviolet light rays.
3. Activated carbon: These are the most effective against most contaminants. They absorb them, thus keeping them away from the water. They are best for lead contaminants.
4. Resin filters: These last longer than all the filters above. They are efficient for filtering out iron contaminants.

Flow Rate

Different well water filtration systems have different flow rate capacities. These capacities are usually measured in GPM, i.e., gallons per minute.

Some well water filtration systems have a 15 GPM to 20 GPM capacity, while others only go up to 7 GPM.

A home may have certain pressure requirements, so it is important when choosing a well water filtration system.

The average required flow rate is between 6 GPM and 12 GPM.

Filter Size

The size of the filter affects aspects like the pressure capacity that the system can contain. Filters are available in sizes that range between 20 to 60 inches.

Filter size will also affect the choice of location for your well water filtration system.

Contaminants To Be Filtered Out

The main purpose of the well water filtration system is to filter out contaminants. Different types of filtration systems filter out different contaminants.

Therefore, you must test your water comprehensively to know which contaminants are present.

Other well water filtration systems are more efficient in filtering out bacteria, while others are more suitable for heavy metals.

➣What Certification Does The Well Water Filtration System Have?

Our well water filtration systems are NSF certified. This means:

1. They are constructed from materials that will not contaminate the well water further, e.g., BPA bisphenol A plastic. Such materials can cause human hormone disruption.

2. Their claim to remove specific contaminants from well water is verified.

• They met >85% efficiency rate during testing.

They are also IAPMO and ANSI Standard 44 certified.

➣How Do You Maintain Well Water Filtration Systems?

Maintaining well water filtration systems is quite simple. Just do the following:

Have A Regular Cleaning Schedule

Clean the well water filtration system thoroughly and regularly. This will keep dirt, contaminants, and minerals from building up in the filter.

Use warm water to rinse them off after using cleaning products that are not harsh.

The period between each clean should be after a week and a fortnight. Be on the lookout for signs of dirt by monitoring the filter every time you use it.

Changing Worn-out Filter Cartridges

Your filter may become clogged if you leave the cartridge unchanged for a long time. This will, in turn, affect the quality of the filtered water.

Also, it would help if you inspected the O-ring’s condition for drips or leaks as you change the filter cartridge.

Replacement Of Parts

Water filtration systems have lifespans, after which they eventually become inefficient. When this occurs, you should consider replacing parts.

After that, you will enjoy healthier, better-tasting, and cleaner water from a system with an improved lifespan.

Back to the guide ⇪

➣What Are The Installation Costs For Well Water Filtration Systems?

Well water filtration systems cost about $60-$2000 to install, depending on the type of filter. The cheapest being carbon filters and the most expensive being UV.

The complexity of the system is also an important aspect to factor in when calculating installation costs.

You should know that some well water filtration systems are quite easy to install because they come with installation kits.

This means you can do it yourself. However, if you are not skilled at plumbing, you can get a professional to help.

Note:

The cost of installing a well water filtration system should not be the only factor you consider when choosing one.

Your primary focus should be on ensuring that the system can filter out contaminants.

Back to the guide ⇪

➣What Is The Lifespan Of Well Water Filtration Systems?

The lifespan of your well water filtration system will vary depending on your daily water consumption and filter type.

With proper operation and adequate maintenance, the well water system can last up to two years.

Note:

You should replace carbon filters annually. They become inefficient if overused.

Back to the guide ⇪

➣What Contaminants Do Water Filtration Systems Remove?

These contaminants include:

Sediments: These are physical particles like dirt, sand, or other debris that occur naturally in well water. They cause appliances to wear fast and thus should be filtered out.

Iron: Plumbing pipes made from iron may contaminate the water as it flows through. Low levels aren’t harmful. However, iron can cause joint pains, fatigue, acne, or organ damage in excessive amounts.

Fluorides: In small amounts, fluoride provides a lot of benefits, including protection from tooth decay. It can, however, have adverse effects on health if consumed in high amounts. It may cause skeletal fluorosis, seizures, vomiting, and nausea.

Organic chemicals: These can include disinfectants, dyes, paints, pharmaceuticals, pesticides, etc. These chemicals can cause kidney or liver damage as well as reproductive a nervous systems damage.

Heavy metals: They include chromium, arsenic, cadmium, lead, and copper. Significant amounts can increase the chances of cancer, among other health threats.

Nitrate:  These occur naturally in well water and should not be cause for alarm. However, high quantities can increase the chances of developing cancer conditions, nausea, or even headaches.

Microorganisms: The most common is E. Coli and coliform bacteria. High levels of microorganisms can cause death or contraction of diseases.

Back to the guide ⇪

➣What Are the Advantages Of Well Water Filtration Systems?

There are two major advantages of well water filtration equipments, i.e.:

Clean And Healthy Water

Water filtration systems for well water are primarily designed to improve water quality. With a filtration system, you can consume water directly from the tap without relying on additional equipment.

The well water filtration systems protect you from contaminants that may cause cancer, congenital disabilities, arteries hardening, kidney and liver damage, etc.

Fewer Mineral Deposits, Sediments, And Scaling

Minerals in high levels can cause substantial damage to your appliances and plumbing. Sediments and heavy metals can also cause wear to your faucets, spouts, and washers, increase energy bills, and significantly reduce the lifespan of your appliances.

All these contaminants are filtered out to prevent their accumulation inside your piping. The accumulation may harden to form deposits which in the long run will become an impediment to Water flow, thus causing pressure complications.

Using a well water filtration system will alleviate all these problems.

Back to the guide ⇪

➣How Do Well Water Filtration Systems Work?

Most well water filtration systems work by the same principle. The process involves three distinct stages.

The first stage is known as pre-filtration. Here, sediments, debris, and physical deposits are filtered out as the water flows into the next stage.

In the second stage, chloramines and chlorine present in the water are minimized using carbon.

Finally, the third stage involves the removal of leftover debris, physical deposits, and sediments.

Back to the guide ⇪

➣How Does Pump Flow Rate Influence The Well Water Filtration System?

Pump flow rate refers to the rate at which well water is pumped into your plumbing from the underground wellbore. The pump flow rate adversely affects the filtration process because it causes the well water to flow through the filter. Low pump flow rates will result in a very slow filtration process leading to inefficiency.

Very high pump rates will, on the other hand, potentially cause damage to the filters. It is therefore recommended that you maintain the flow rate at a moderate pressure range. Also, pump flow rates play an important role in determining the type of well water filtration system. Different flow rates should be paired with appropriately sized Well Water filtration systems.

You should select a well water filtration system with a recommended flow rate that exceeds or meets the peak flow rate in your household.

Back to the guide ⇪

➣Why Is Water Pressure An Important Factor When Selecting Well Water Filtration Systems?

Water pressure is an essential factor to consider when selecting well water filtration systems. Technically, well water filtration systems reduce the water pressure during the filtration process.

Therefore, you should select a well water filtration system appropriate to the water pressure from the pressure system.

This will ensure that you have sufficient water pressure inside your home appliances like faucets, snorts, and other fixtures.

Back to the guide ⇪

➣Can You Use Well Water Filtration Systems To Provide Clean Drinking Water?

Yes. Well water filtration equipment can filter heavy metals, pesticides, bacteria, etc., from well water to provide better-tasting and healthy drinking water.

Using a well water filtration system is one of the most effective methods of making Well Water pure.

The process does not remove essential minerals that may be essential to human health.

Back to the guide ⇪

➣What Is The Required Water Flow Rate For Efficient Filtration?

Flow rates are measured in GPM, i.e., gallons per minute. This estimates the water volume in gallons that could potentially come out of the filtration system.

Some well water filtration systems have a 15 GPM to 20 GPM capacity, while others only go up to 7 GPM.

A home may have certain pressure requirements, so it is important when choosing a well water filtration system.

The average required flow rate is between 6 GPM and 12 GPM.

Back to the guide ⇪

➣How Effective Are Well Water Filtration Systems?

The effectiveness of a well water filtration system will vary depending on its type and size. Most, however, will eliminate 99% of volatile organic compounds such as bacteria, viruses, and harmful pathogens.

This will protect you against unclean water.

Additionally, when you use a well water filtration system, you will notice improved pH levels and reduced corrosion on your appliances.

This will make the lifespans of your household fixtures even longer.

They also remove odor, chloramines, and chlorine from water. In a nutshell, well water filtration systems are very effective.

Back to the guide ⇪

➣What Cartridges Are Compatible With Well Water Filtration Systems?

There is a wide range of water filter cartridges for your well water filtration system to choose from. These include:

Activated Carbon Cartridges

They are made from charcoal and are a cheaper way to remove harmful contaminants from well water.

They are great for removing chloramines, volatile organic compounds, chlorine, etc. They do not remove sediments, minerals, or salts effectively.

Alkaline Ionizer Cartridges

These cartridges add essential minerals to your filtered well water. They have mineral rocks that have been activated ionically.

This will balance out the water by boosting its pH.

Ceramic Cartridges

These are perhaps the most unique of the bunch. They are positively charged to ensure that they attract bacteria.

The bacteria are destroyed on contact. They do not filter out particles and remove ONLY bacteria.

Reverse Osmosis Cartridges

These employ the use of a very dense membrane that can filter out microbic particles.

They are very effective in removing any contaminant from your water, including foul taste, odor, chemicals, pesticides, heavy metals, etc.

Sediment Filter Cartridges

These cartridges filter out debris, particles, dirt, and sediments from water.

However, they do not remove microscopic contaminants such as chemicals, bacteria, or volatile organic compounds.

Ultraviolet Cartridges

These kill algae, dysentery, cysts, salmonella, fungi, among other types of bacteria and viruses.

These cartridge filters do not allow water to pass through them. Rather, they apply a UV light-emitting bulb to kill contaminants.

Back to the guide ⇪

➣What Materials Are The Filtration Systems for Well Water Constructed From?

The most popular well water filtration systems have AC or active carbon (sometimes called activated carbon granules) as the primary filtration media.

The body is constructed from materials that will not contaminate the well water further, e.g., BPA bisphenol A plastic.

Such materials cause human hormone disruption and shouldn’t be used. The body is built from NSF-approved plastics.

Back to the guide ⇪

➣What Are The Disadvantages Of Well Water Filtration Systems?

1. The cost of acquiring and installing well water filtration equioments can be high.

2. Some well water filtration systems do not remove all types of contaminants. This may lead to health hazards as you may end up consuming unclean water.

3. The filtration process for some well water filtration system types can be slow.

4. Some water filtration systems require frequent replacement of parts to keep working effectively.

5. Cartridges must be disposed of as they may contain harmful contaminants that have been filtered out.

Back to the guide ⇪

➣What Are Recommended Installation Preconditions For Well Water Filtration Equipments?

Water flow rate: You should select a well water filtration system that has a recommended flow rate that exceeds or meets the peak flow rate in your household.

Pressure level:  Some well water filtration equipment have a 15 GPM to 20 GPM capacity while others only go up to 7 GPM. A home may have certain pressure requirements, so it is important when choosing a well water filtration system.

The average required flow rate is between 6 GPM and 12 GPM.

Back to the guide ⇪

➣How Often Should You Replace Well Filtration Systems Filters?

You need to replace your well water filtration system filters every 3-6 months.

The variation arises from factors like the type of filter in your system, the quality of the well water, and household consumption.

Be on the lookout for signs that indicate when a replacement is necessary. These signs include:

1. A visible change in water color, odor, or taste.

2. A significantly clogged filter.

• Reduced water pressure.

Neglecting to replace your filter will result in unsanitary water and even more expensive system repair.

Back to the guide ⇪

➣What Are The Components Of Well Water Filtration Systems?

1. A sediment prefilter. This will filter out debris, particles, dirt, and sediments from water. However, it does not remove microscopic contaminants such as chemicals, bacteria, or volatile organic compounds.

2. An antibacterial system. This will remove harmful cysts, viruses, and bacteria present in the well water. This could be done by either chlorination or the use of UV light.

• Activated carbon filter. This component removes chloramines and chlorine. It uses charcoal or activated carbon granules.
• Resin filter. This component removes contaminants that harden water, such as iron, magnesium, and calcium.

Back to the guide ⇪

Other Useful Links:

RO Filter Membranes

Water Treatment Equipment

Drinking-Water Systems

Waste Water Treatment System

Industrial Support Systems

For any questions or inquiries, contact us now.